Anon. (2003). EN 13739-2: Landmaschinen-Auslegerund Wurf-Mineraldüngerstreuer- Umweltschutz, Teil 2: Prüfmethoden (Veröffentlichung in Vorbereitung). European Standards.
Anon. (2006). NY/T1003: Technical Specification of Quality Evaluation for Fertilizing Machinery. China Standards. National Agricultural Technology Extension and Service Center.
Anon. (2009). S341.4: Procedure for measuring distribution uniformity and calibrating granular broadcast spreaders. ASAE Standards. St. Joseph, Mich. ASABE. USA.
Anon. (2012). Feeding the World. Food and Agriculture Organization of the United Nations, Rome, Italy.
Anon. (2013). Current global food production trajectory won't meet 2050 needs. ScienceDaily, Available at: www.sciencedaily.com.
Aphale, A., Bolander, N., Park, J., Shaw, L., Svec, J., & Wassgren, C. (2003). Granular fertilizer particle dynamics on and off a spinner spreader. Journal of Biosystems Engineering, 85,
p. 319-329.
Batchelor, G. K. (1967). An Introduction to Fluid Dynamics. Cambridge University Press.
Benito, M., Masaguer, A., Moliner, A., Arrigo, N., & Palma, R. M. (2003). Chemical and microbiological parameters for the characterisation of the stability and maturity of pruning waste compost. Journal of Biology and Fertility of Soils, 37, p. 184-189.
Carman, K. (1991). The effect of disc peripheral speed and free radius on the distribution pattern in single spinning-disc type spreader. Selcuk University Journal of Agricultural Faculty, 2, p. 75-83.
Ghasemi, Y., Kianmehr, M., Mirzabe, A. H., & Abooali, B. (2013). The effect of rotational speed of the drum on physical properties of granulated compost fertilizer. Journal of Physicochemical Problems of Mineral Processing, 49, p. 743-755.
Glover, J. W., & Baird, J. V. (1973). Performance of spinner type fertilizer spreaders. Transactions of the ASAE, 16, p. 48-51.
Grift, T. E., Kweon, G., Hofstee, J. W., Piron, E., & Villete, S. (2006). Dynamic friction coefficient measurement of granular fertilizer particles. Journal of Biosystems Engineering, 95, p. 507-515.
Hofstee, J. W., & Huisman, W. (1990). Handling and spreading of fertilizers Part 1: Physical properties of fertilizer in relation to particle motion. Journal of Agricultural Engineering Research, 47, p. 213-234.
Lawrence, H. G., & Yule, I. J. (2007). Estimation of the in‐field variation in fertiliser application. New Zealand Journal of Agricultural Research, 50, p. 25-32.
Moursy, H. E. M. N. (2002). Granulation of Nitrophosphate fertilisers (Ph. D. Thesis) Queen’s University Belfast, Belfast.
Olieslagers, R., Ramon, H., & Baerdemaeker, J. D. (1996). Calculation of fertilizer distribution patterns from spinning disc spreader by means of simulation model. Journal of Agricultural Engineering, 63, p. 137-152.
Parish, L. R. (2002). Rate setting effects on fertiliser spreaderdistribution patterns. Applied Engineering in Agriculture, 18, p. 301-304.
Parish, R. L., & Chaney, P. P. (1985). Evaluation of a rotary spreader with a helical cone for drop point control. Transactions of the ASAE, 25, p. 1140-1444.
Przywara, A. (2015). The impact of structural and operational parameters of the centrifugal disc spreader on the spatial distribution of fertilizer. Agriculture and Agricultural Science Procedia, 7, p. 215-222.
Reddy, B. C., Murthy, D. V. S., & Rao, C. D. P. (1997). Modeling of a rotary drum granulator for control. Particle & Particle Systems Characterization, 14, p. 257-262.
Rees, R. M., Baddeley, J. A., Bhogal, A., Ball, B. C., Chadwick, D. R., Macleod, M., Lilly, A., Pappa, V. A., Thorman, R. E., Watson, A. C., & Williams, J. R. (2013). Nitrous oxide mitigation in UK agriculture. Soil Science and Plant Nutrition, 59, p. 3-15
Stewart, W. M., Dibb, D. W., Johnston, A. E., & Smyth, T. J. (2005). The contribution of commercial fertilizer nutrients to food production. Journal of Agronomy, 97, p. 1-6.
Van Liedekerke, P., Piron, E., Vangeyte, J., Villette, S., Ramon, H., & Tijskens, E. (2008). Recent results of experimentation and DEM modeling of centrifugal fertilizer spreading. Journal of Granular Matter. 10, p. 247-255.
Van Liedekerke, P., Tijskens, E., Dintwa, E., Rioual, F., Vangeyte, J., & Ramon, H. (2009). DEM simulations of the particle flow on a centrifugal fertilizer spreader. Journal of Powder Technology, 190, p. 348-360.
Villette, S., Piron, E., & Miclet, D. (2017). Hybrid centrifugal spreading model to study the fertiliser spatial distribution and its assessment using the transverse coefficient of variation. Computers and Electronics in Agriculture, 137, p. 115-129.
Villette, S., Piron, E., Miclet, D., Martin, R., Jones, G., Paoli, J. N., & Gee, C. (2012). How mass flow and rotational speed affect fertilizer centrifugal spreading: Potential interpretation in terms of the amount of fertiliser per vane. Journal of Biosystems Engineering, 111, p. 133-138.
Yildirim, Y. (2006). Effect of vane number on distribution uniformity in single-disc rotary fertilizer spreaders. Applied Engineering in Agriculture, 22, 659‒663.
Yinyan, S., Man, C., Xiaochan, W., Odhiambo, M. O., & Weimin, D. (2018). Numerical simulation of spreading performance and distribution pattern of centrifugal variable-rate fertilizer applicator based on DEM software. Computers and Electronics in Agriculture, 144, p. 249-259.
Zafari, A., & Kianmehr, M. H. (2012). Livestock manure management and pelleting. Agricultural Engineering International: CIGR Journal, 14, p. 78-84.
)