Document Type : Original Article

Abstract

Due to the high labor costs in the production of rice, using rice planting and mechanization is one of the basic strategies for sustainability preparing healthy and strong seedling, transplanting and reducing the cost of rice production. Crop response to mechanized planting with planting machines due to differences in the density and type of planting is different. Therefore, this study aimed to achieve the most suitable criteria transplanting age of four varieties of rice in the crop year 2009 was conducted at the Chaparsar Rice Research Station (Tonekabon city). Experiments conducted, using a split-plot design in a randomized complete block design with three replications. The main factor included four levels of transplanting ages (20, 27, 33 and 40 days) and the subplots were four varieties of rice cultivars (Hashemei, Khazar, Hybrid and Shiroodi). Analysis of variance showed that transplanting age affected on most of the factors and data has the significant differences at the level of five, one and 0.1 percent. Effects of rice varieties also were significant on all factors. Correlation coefficient of data was positive and has significant relationship with the characters. The highest yield were achieved for 20 days rice transplanting age with the amount of 5166.9 kg per hectare. Among cultivars, the highest yield belonged to the Shiroodi verities with 5899.9 kg per hectare. Therefore, to achieve the highest yield potential of shiroodi verities, the 20 day transplanting ages is recommended for planting the rice transplanting by walking type transplanters.

Keywords

Burkalow, A. 1945. Angle of repose and angle of sliding friction: an experimental study. Bull. Geol. Soc. Am. 56, 6-7.
 
Fraczek, J., Zlobecki, A., and Zemanek, J. 2007. Assessment of angle of repose of granular plant material using computer image analysis. Food Eng. 83,17-22.
 
Henein, H. 1980. Bed behavior in rotary cylinders with applications to rotary kilns. Ph. D Dissertation, University of British ariety. Vancouver.
 
Jain, R.K., Bal, S. 1997. Properties of pearl millet. J. Agric. Eng. Res. 66, 85-91.
 
Karababa, E. 2006. Physical properties of popcorn kernels. J. Food Eng. 72, 100-107.
 
Khazaei, J. and Ganbari, S. 2010. New method for simultaneously measuring the angles of repose and frictional properties of wheat grains. Int. Agroph. 24, 275‐286.
 
Kingsly, A.R.P., Singh, D.B.,  Manikatan, M.R., and Jain, R.K. 2006. Moisture dependent physical properties of dried arietyate seeds. J. Food Eng. 75, 492-496.
 
Koocheki, A., Razavi, S.M.A., Milani, E., Moghadam, T.M., Abedini, M., Alamatiyan, S., and Izadkhah, S. 2007. Physical properties of watermelon seed as a function of moisture content and ariety. Int. Agroph. 21, 349-359.
 
Lee, J. and Herrmann, H.J. 1993. Angle of repose and angle of marginal stability: molecular dynamics of granular particales. J. Physics. 26, 373.
 
Liu, X.Y. 2005. Impact of cohesion forces on particle mixing and segregation. Ph.D Dissertation. University of Pittsburgh. PA. USA.
 
Liu, X.Y., Specht, E. and Mellmann, J. 2005a. Experimental study of the lower and upper angles of repose of granular materials in rotating drums. Powder Technol. 154, 125-131.
 
Liu, X.Y., Specht, E. and Mellmann, J. 2005b. Slumping-rolling transition of granular solids in rotary kilns. Chem. Eng.  Scientist. 60, 3629-3636.
 
McGinity, J. W. and Felton, L.A. 2008. Aqueous polymeric coatings for pharmaceutical dosage forms. Third Edition. 67-75.
 
Mellmann, J. 2001. The transverse motion of solids in rotating cylinders forms of motion and transition behavior. Powder Technol. 118, 251-270.
 
Mohsenin, N.N. 1986. Physical Properties of Plant and Animal Materials. Gordon and Breach. Amsterdam.
 
Pandy, P., Turton, R., Joshi, N., Hammerman, E. and Ergan, J. 2006. Scaleup of a pan coating process. AAPS pharmscitech. 7(4). Article 102.
 
Sessiz, A. Esgici, R., and Kizil, S. 2006. Moisture-dependent physical properties of caper fruit. J. Food Eng. 75, 492-496.
 
Singh, K.K. and Goswami, T.K. 1996. Physical properties of cumin seed. J. Agric. Eng. Res. 64, 93-98.
 
Vanangamudi, K. and Natrajan, K. 2006. Advances in Seed Science and Technology. 123-131.
 
Zhou, Y.C., Wright, B.D., Yang, R.Y.,  Xu, B.H. and Yu, A.B. 1999. Rolling friction in the dynamic simulation of sandpile formation. J. Physica. 269, 536-553.