Volume 24 (2023)
Volume 23 (2022)
Volume 22 (2021)
Volume 21 (2020)
Volume 20 (2019)
Volume 19 (2018)
Volume 18 (2017)
Volume 17 (2016)
Volume 16 (2015)
Volume 15 ()

The "Agricultural  Mechanization and Systems Research" is journal published since 2004 in Persian language, Semiannual publication and print-electronic format with open access, which is published by Agricultural Engineering Research Institute. The Journal of "Agricultural  Mechanization and Systems Research" is not a member of the International Committee on Ethics in Publication (COPE), but it follows its principles. Authors of the article are obliged to observe scientific ethics and publish according to the instructions of this committee. The articles submitted for publication in the Journal of Agricultural  Mechanization and Systems Research must be the result of original research in  current issues in technical research and the agricultural machinary and have not been published in another journal or submitted to other journals at the same time. In order to protect the rights and intellectual property of the researchers and authors, the system "Hamanandjo-Irandoc" or "Hamanandiyab-Sinaob" is used for Persian articles and the software "iThenticate" is used for English articles in checking the authenticity of the articles in this publication. Similarity more than 35% is not acceptable. (Read More ...)

 

Publisher: Agricultural Engineering Research Institute

 License number and date of the Ministry of  Science, Research and Technology: 3/18/81671 dated  2015 July 22

Frequency: Quarterly 

Type of articles: Research article-  Review article- Analysis article- Short research article

The article Language: Persian

Abstract Language: English and Persian

Type of refereeing: Double-blind peer-reviewer

plagiarism diagnostic software:  "Hamanandjo-Irandoc" or "Hamanandiyab-Sinaob" (Persian) and  "iThenticate" (Abstract English)

Access to all articles: open access

Review and publishing fee: Yes (Article Processing Charges)

Release Policy: CC-BY

Ethical code: This publication follows the rules of COPE (Committee on Ethics in Publishing)

                                                                                                                   

                                  =======================================

Original Article
Identifying Decision-Making Criteria Among Farmers in Agricultural Crop Cultivation: A Case Study of West Azerbaijan Province

ehsan Abdolalizadeh; hossein bakhoda; Morteza Almassi

Volume 25, Issue 89 , April 2024, Pages 1-14

https://doi.org/10.22092/amsr.2024.365757.1489

Abstract
  Reduced rainfall, the crisis of Lake Urmia, and the shortage of available agricultural water have intensified environmental concerns among farmers. These crises have adversely affected agriculture to the extent that the country has experienced a decline in food security at the production level. This ...  Read More

Original Article
The effect of light quality and photoperiod of LED on the growth of lettuce in a vertical greenhouse

Gholamreza Chegini; Sasan Aliniaeifard; Mohammadreza Khoramtabrizi

Volume 25, Issue 89 , April 2024, Pages 15-30

https://doi.org/10.22092/amsr.2024.366698.1497

Abstract
  Using controlled environments with stratified cultivation with artificial light is one of the alternative ways to produce agricultural products in controlled space. With the spectrum of different lights caused by LED lamps, the conditions of plant photosynthesis can be provided in the highest form along ...  Read More

Development of a Precision Weed Control System for Lawns using Machine Vision
Volume 19, Issue 70 , September 2018, , Pages 55-68

https://doi.org/10.22092/erams.2018.107033.1119

Abstract
  A large amount of herbicide is being used for controlling weeds in agricultural, lawns, sport fields on yearly basis. This causes environmental pollution and economic concerns. To reduce the use of herbicides, hand labor may be the best way of removing weeds. It is, however, costly and time consuming. ...  Read More

Design, Construction, and Evaluation of Fully-Automatic Tomato Transplanter
Volume 16, Issue 65 , March 2016, , Pages 79-92

https://doi.org/10.22092/erams.2016.105955

Abstract
  The present study designed, constructed, and evaluated a fully-automatic tomato transplanter. In this device, a step mechanism gradually guides the tray to the left, right, and down under the arm so that the pin lifter can be position to penetrate the soil in the cell to grasp a seedling. The arm then ...  Read More

Economic Analysis of Okra Production Systems in Khuzestan Province
Volume 21, Issue 74 , September 2020, , Pages 33-46

https://doi.org/10.22092/erams.2018.121717.1256

Abstract
  Today, farmers are looking for solutions to increase production and income. One of these solutions is the supplyink off-season crops and horticultural products. Considering the high level of okra production and consumption in Khuzestan province, this study was conducted with the aim of evaluating the ...  Read More

Design and Fabrication of Gravity Separator of Stone from Cattle Manure and Determining Maximum Efficiency
Volume 20, Issue 73 , March 2020, , Pages 35-52

https://doi.org/10.22092/erams.2018.121863.1258

Abstract
  One of the methods of using livestock exhaust is compressing and pelletting it, which causes facilitation of transportation, reduction of odor and gradual release of nitrogen. For manure pelleting, extruder and disk pelleting are used. Since the stones existing materials in the stored manure cause damage ...  Read More

Fabrication and Evaluation of House Scale Green Waste Composting Machine
Volume 19, Issue 70 , September 2018, , Pages 69-84

https://doi.org/10.22092/erams.2017.107353.1130

Abstract
  In this study, a U-shaped reactor with aeration, heating and stirring systems was designed for composting process. The length, width and height of reactor were 110, 66 and 70 cm respectively. The experiment was carried out at different aeration rate (0.2, 0.4 and 0.6 Lit/min.Kg DM) and time (0, 19, 38, ...  Read More

Original Article
Investigation of Rosa flower bud drying kinetics, total phenol and color indices variations at different drying methods

Omid Reza Roustapour; Aَbolfazl Golshan Tafti; Hamid Reza Gazor; Fatemeh Sefidkon

Articles in Press, Accepted Manuscript, Available Online from 26 January 2025

https://doi.org/10.22092/amsr.2025.367749.1505

Abstract
  Production of dried Rosa flower bud with high quality of color and essential oil is concerned for related industries. Six methods of drying process contain shade drying, indirect solar dryer, cabinet dryer in three levels of inlet air temperature (40, 50, 60 oC) and freeze dryer were compared together ...  Read More

Original Article
Tillage systems effect and irrigation cutting at different bread wheat growth stages on grain yield and soil properties in Fars province

Shokoofeh Sarikhani Khorami; Sadegh Afzalinia; Seyed Abdolreza Kazemeini

Articles in Press, Accepted Manuscript, Available Online from 08 March 2025

https://doi.org/10.22092/amsr.2025.368082.1509

Abstract
  Implementing conservation tillage is important system to achieve sustainable agriculture by conserving water and soil resources. Experimental treatments were three-tillage practices—conventional tillage (CT), Minimum tillage (MT), and no tillage (NT)—and irrigation cutting at pollination, milky and ...  Read More

Keywords Cloud

Related Journals