@article { author = {Rahimi, R. and Kianmehr, M. H. and Hassan-Beigi, S. Reza and Zarafshan, Payam}, title = {Design and Fabrication of Gravity Separator of Stone from Cattle Manure and Determining Maximum Efficiency}, journal = {Agricultural Mechanization and Systems Research}, volume = {20}, number = {73}, pages = {35-52}, year = {2020}, publisher = {Agricultural Engineering Research Institute}, issn = {2476-4612}, eissn = {24764620}, doi = {10.22092/erams.2018.121863.1258}, abstract = {One of the methods of using livestock exhaust is compressing and pelletting it, which causes facilitation of transportation, reduction of odor and gradual release of nitrogen. For manure pelleting, extruder and disk pelleting are used. Since the stones existing materials in the stored manure cause damage to the pelletting apparatus, so the removal of the stone from the manure before the processing is necessary. In this research, with the aim of separation the rock from the manure, a gravity separator was designed and fabricated. The performance of the device was evaluated by changing the three slope parameters of the material separator plates, manure moisture content and the size of the stone and manure dimensions The changed level was for 10, 15 and 20 ° slopes of separators, 10, 30 and 50% of the moisture content of manure, and for the particle size of less than 10, 10 to 20 and 20 to 50 mm. The maximum device separation efficiency of the stone from the manure was 76.81% at 10 ° slope, 50% moisture content and a particle size less than 10 mm.}, keywords = {biomass,Cascade,Pellet,Slope plates,Vibration}, title_fa = {طراحی، ساخت و ارزیابی دستگاه جداساز گرانشی سنگ از کود دامی}, abstract_fa = {یکی از روش‌های استفاده از فضولات دامی، فشرده‌سازی و پلت کردن آن است که باعث سهولت در حمل و نقل، کاهش بو و آزادسازی تدریجی نیتروژن می‌شود. برای پلت کردن کود دامی از دستگاه‌های اکسترودر و پلت‌کنندۀ دیسکی استفاده می‌شود. از آنجا که تکه ­های سنگ‌ و مواد اضافی موجود در کود انبار شده، باعث آسیب رساندن به دستگاه‌های پلت‌سازی می‌شود، جداسازی سنگ از کود قبل از فرآوری از جمله ضروریات فرآوری کود خواهد بود. در این تحقیق، یک دستگاه جداساز گرانشی با هدف جداسازی سنگ از کود طراحی و ساخته شد. با تغییر سه پارامتر شیب صفحات جداساز مواد، رطوبت کود و اندازۀ ابعاد سنگ و کود، عملکرد دستگاه ساخته شده ارزیابی شد. بدین منظور سطوح آزمایش برای شیب صفحات جداساز 10، 15 و 20 درجه، برای رطوبت کود 10، 30 و 50 درصد رطوبت و برای اندازۀ تکه­های سنگ و کود 10 و کمتر از 10، بین 10 تا 20 و بین 20 تا 50 میلی‌متر درنظر گرفته شد. بامقایسه میانگین‌ها، بیشترین بازده جداسازی سنگ از کود با دستگاه (به میزان81/76 درصد)، در سطح شیب 10 درجه، رطوبت 50 درصد و تکه سنگ­ های 10 و  کمتر از 10 میلی‌متر، به­ دست آمد.}, keywords_fa = {آبشاری,ارتعاش,پلت,صفحات شیبدار,مواد زیست توده}, url = {https://amsr.areeo.ac.ir/article_118008.html}, eprint = {https://amsr.areeo.ac.ir/article_118008_acab1af95d1d10a5358d54488601611e.pdf} }