@article { author = {رنجبر, فردین and کیانمهر, محمد حسین}, title = {Study of physical properties and different mode of motion of three type of seeds in rotating drum for seed coating}, journal = {Agricultural Mechanization and Systems Research}, volume = {17}, number = {67}, pages = {55-68}, year = {2017}, publisher = {Agricultural Engineering Research Institute}, issn = {2476-4612}, eissn = {24764620}, doi = {10.22092/erams.2017.113000}, abstract = {The optimal use of rotary seed coater needs the knowledge of the physical properties and the behavior of seed motion in rotary drum. One of the most important parameter in these equipments is the rotational speed of the drum which seeds have rolling mode. In this research a new method was used for measuring these properties that was based on the motion of seeds in a less than 50% filled rotating drum. Firstly the angle of repose of three types of seed (vetch, wheat and tomato seed) with different shape was measured with different methods and the values obtained were compared. Then, the lower and upper angle of repose were also measured by rotary drum. At the final step, the rotational speed of the drum were gradually increased from 0 to 100 rpm and the speed of the drum which the seed rolling mode of motion began and ended was measured. The results showed that the shape of the seeds has a great impact on the type of their motion in the rotating drum and it was obtained that the vetch seeds had the widest speed range with rolling mode of motion (from 1 to 65 rpm). However, this range for tomato seeds is from 8 to 40 rpm and for wheat seeds from 6 to 49 rpm. The increase of filling degree from 25% to 40%, the rolling mode of motion for all of seeds began and ended sooner.}, keywords = {rotary drum,seed,mode of motion,angle of repose}, title_fa = {بررسی خواص فیزیکی و حالتهای مختلف حرکتی سه نوع بذر در استوانۀ دوار برای پوشش‌دهی مناسب بذر}, abstract_fa = {ااستفادۀ بهینه از دستگاه‌های پوشش‌دهندۀ دوار بذر مستلزم دانستن اطلاعاتی دربارۀ خواص فیزیکی و چگونگی حرکت بذر در استوانۀ دوار است. یکی از مهمترین تنظیمات، تنظیم سرعت دورانی استوانۀ دوار است به گونه‌ای که بذرهای داخل استوانۀ حرکت غلتان داشته باشند. برای به‌دست آوردن این اطلاعات، از روش جدیدی استفاده می‌شود که بر اساس حرکت دانه‌ها در استوانه‌ای ‌دوار استوار است که کمتر از پنجاه درصد پر شده‌باشد، استوار است. دلیل انتخاب این بذرها شکل و ضریب کرویت متفاوت آنهاست. زاویه‌های استقرار پایین و بالا برای هر سه نوع بذر، با استفاده از استوانۀ‌دوار اندازه‌گیری شد. در مرحلۀ بعد سرعت استوانه به تدریج از صفر تا صد دور در دقیقه افزایش داده‌شد و سرعت شروع و خاتمۀ حرکت در حالت غلتان برای هر بذر به دقت مشخص گردید. نتایج بررسی‌ها نشان می‌دهد که شکل بذر تاثیر زیادی بر چگونکی حرکت آن‌ در استوانۀ دوار دارد. در پرشدگی 25 درصد، بذر کروی شکل ماشک، بازترین دامنۀ حرکت غلتان را دارد و تقریبا از سرعت یک تا 65 دور در دقیقه دارای حرکت غلتان است در حالی که این دامنه برای بذر گوجه‌فرنگی از 8 دور در دقیقه شروع می‌شود و در حدود 40 دور در دقیقه خاتمه می‌یابد. همچنین دامنۀ حرکت غلتان برای بذر گندم از 6 دور در دقیقه شروع می‌شود و در سرعت49 دور در دقیقه پایان می‌یابد. این تحقیق در پی تعیین میزان بهینۀ سرعت دوران استوانه برای پوشش‌دهی نیست و صرفا در جستجوی ارتباط خواص فیزیکی بذر با رفتار حرکتی آن در استوانۀ دوار است.}, keywords_fa = {ا: استوانۀ دوار,بذر,حالت‌های حرکت,زاویۀ استقرار}, url = {https://amsr.areeo.ac.ir/article_113000.html}, eprint = {https://amsr.areeo.ac.ir/article_113000_8154a52e1e491ceb4a54990aa33f42da.pdf} }